Pump-Out Extractor

• Automatic Pump Out Extractor. Specifications Pump-Out Part Number 211036 Fiberglass Tank 10 gal solution and Recovory Vacuum in air series @ 150" water lift 100 CFM w/positive ball shut off Solution Pump 60 psi internal bypass Auto Pump Out 1/3 HP cast iron submesible w/ float switch. 40 GPM (max) and 28' max head or 200' horizontal discharge. Service Tank is hinged onto motor housing on the back of the machine. Release (2) front latches and swing tank upwards to expose motor compartment. Tank is held in place by support rod. Power Cord 12/3 X 25 ft. SJTW safety yellow with molded (3)prong plug GFCI (ground fault interrupter) protected Dome High impact resistant clear plastic. Dome pivots on a slotted bracket to provide perfect seal and compensate for gasket wear Wheels Rear 8" x 1-3/4" non-marking PVC tread. Front 3" non-marking gray Switches DPST green lighted rocker switches with clear PVC splash proof caps for PUMP, VAC 1, and VAC 2. Black rocker switch with clear PVC splash proof cover for AUTO PUMP Weight (with cord) 88 lbs. (40KG) Demensions 27" L x 16" W x 34" H	Click To Enlarge
Included Accessories 25 ft. vacuum and solution hoses, 1-1/2" x 50 ft. flat discharge hose, large debris filter bag (vacuum intake).
Optional Accessories 12" Single Jet all stainless steel wand, 3.5" cast aluminum upholstery tool, gray hose bag, 12" swivel head squeegee (for use on hard floors), 1-1/2" x 100 ft. flat discharge hose with extension coupler.